Austal USA is recognized for its advancements in naval ship design and construction, presenting distinctive opportunities for team members to participate in influential initiatives shaping the maritime sector now and in the future. With a heritage rooted in innovation, Austal USA has been instrumental in propelling naval technology forward through sophisticated design, engineering, and delivery of Littoral Combat Ships (LCS), Expeditionary Fast Transport (EPF) to the recently awarded Offshore Patrol Cutter (OPC), Expeditionary Medical Ship (EMS), and the T-AGOS ocean surveillance vessels. What sets Austal USA apart is our commitment to innovation and our dedication to building the best ships for the United States Navy and the United States Coast Guard. We actively cultivate a culture fueled by intellectual curiosity and diverse perspectives, where every team member is integral to delivering cutting-edge solutions. REPORTS TO: Test and Activation Manager SUPERVISES: None DUTIES/RESPONSIBILITIES: This position is an entry level in the test technician & activation job family. Under close supervision, performs routine test technician duties in the support of higher level Test Specialists. • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, and trouble-shooting functions of a simple nature. • Performs routine operational test and fault isolation on systems and equipment to ensure conformance with final product specifications. • Utilizes routine manufacturing test or diagnostic equipment specific to the product. • May perform limited design activities in support of test equipment/procedures development. • Assigned to activities such as production, test, system checkouts, quality control. • Conducts defined tests and collects data as assigned. • Diagnoses and isolates malfunctions down to the component level. QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: Preferred experience and/or training: Testing experience in a shipyard, marine, aerospace, industrial/commercial, or off shore oil and gas environment. Two (2) years technical trade or military technical school. Prior Navy, Coast Guard, or Merchant Mariner experience. Basic understanding of ship construction drawings and testing procedures. Basic knowledge of how marine equipment should operate. Basic Mechanical and/or Electrical aptitude is essential. Basic understanding of mechanical and electrical propulsion and electrical power generating equipment. Demonstrated ability to read and interpret electrical and piping system diagrams, schematics and drawings. Knowledge of diesel engines and gas turbines Knowledge of shipboard damage control systems Knowledge of hydraulic systems and shipboard deck equipment Knowledge of Auxiliary and/or HVAC systems. Desire and ability to work in a shipyard environment required. Ability to maintain proficiency in shipboard engineering plant terminology and operations; retain knowledge of industrial or marine ancillary machinery systems installation and operation required. ADDITIONAL GUIDELINES: Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA: 18 years of age or older at time of application Able to provide proof of US Person Status No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date No felony convictions of Drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check The ability to obtain and maintain a DoD clearance may be required if deemed necessary in the scope of your position responsibilities. TRAVEL: This position will require repair efforts in various offsite locations and will be required to travel to customer sites to support work on vessels if deemed necessary in the scope of your position responsibilities. The potential for offsite travel can potentially be in excess of 15-25%. Some overseas travel is possible although NO TRAVEL to declared warzones is anticipated. TOOLS: Multi-meter Basic hand tools Wrenches Socket sets Etc to accomplish assigned tasks PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: 1. Must have the ability to bend, squat, stoop, crawl, and kneel. 2. Perform prolonged standing. 3. Ability to turn head from side to side and about the vertical axis. 4. Ability to turn body at the waist from side to side and about the vertical axis. 5. Lift/push/pull 50lbs to 75lbs on an occasional basis. 6. Lift/push/pull up to 20lbs on a frequent basis. 7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). 8. Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts. 9. Able to work at a variety of levels (ex. waist, eye, overhead). 10. Demonstrate the ability to safely and appropriately use required tools and equipment. 11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. 12. Possess sufficient handgrip and coordination to carry and operate tools and equipment. 13. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. 14. Ability to withstand cold and hot temperatures. 15. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. 16. Able to respond to verbal and audible sounds/commands. 17. Able to utilize adequate visual skills. 18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 19. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion. Austal USA is a ship manufacturer headquartered in Mobile, Ala., with service centers in San Diego and Singapore and a technology center in Charlottesville, Va. With the most modern steel panel line in the shipbuilding industry, Austal USA’s facility is capable of supporting the manufacture of both aluminum and steel ships. Austal USA leverages a moving module production line and strict adherence to lean manufacturing principles to consistently deliver on-schedule and on-budget. Austal USA is currently under contract for several programs, including the U.S. Coast Guard’s Heritage-class Offshore Patrol Cutter (OPC), the TAGOS-25 ocean surveillance ships, the Spearhead-class Expeditionary Fast Transport (EPF), the Navajo-class Towing, Salvage and Rescue ships (T-ATS), the Expeditionary Medical Ship (EMS), the Auxiliary Floating Dry Dock Medium (AFDM), and the Independence-variant Littoral Combat Ship (LCS), and is supporting Navy unmanned vessel programs leveraging its advanced machinery control system. Austal USA’s service business provides global support to U.S. Navy, Military Sealift Command and other customers. Austal USA’s San Diego Service Center includes a waterfront facility that will have the capability to drydock small combatants and similar sized ships. Earning 23 safety excellence awards, Austal USA continues to be one of the safest shipyards in America.

Test and Activation Specialist I.

more at Austalusa.

Program Engineering Intern

Supply Chain Management Intern

Welding Engineer Intern - AAT

similar roles.

ServiceNow Technical Architect

Senior Embedded C++ Low Level Developer and Architect

Cybersecurity Engineer (Check Point)

Senior Software Engineer (Apex Team)

Senior Backend Software Engineer (Node.js / TypeScript)

IBM CP4I Technical Architect