Log inSign up free
  • Home
  • Jobs
    • Applications
    • Career
    • Resume
    • Cover letters
    • Job X-ray
  • Studio
  • More tools
    • Profile
    • Hiring
  • Settings
All jobs
BGBosch Group logo

Bosch Group

Bayan Lepas, my

Engineer - Product Quality.

FULL TIMEENGINEERING

Job Summary

  • Responsible for new product quality requirement.
  • Ensure products manufactured meet product & process quality requirements.
  • Customer complaint resolution and product warranty improvement.
  • Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
  • Ensure closed loop of internal and external audit finding include product safety audit.
  • Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
  • Responsible for process improvement project and update Management on the improvement result.
  • Responsible for Quality problem resolution through problem solving process PSS/8D.
  • Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
  • Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
  • Monitor, report of KPI’s in timely manner and establish action plan.
  • Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

  • Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
  • New project product qualification test include fulfill the regulation requirement.
  • Actively involves in FEP, QG, FMEA, CP and production line release.
  • Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
  • Provide training to QMM test technician on all the related inspection plan and checklist.
  • Work with service center to understand the product quality level in the market.
  • Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
  • Responsible for part release and incoming inspection plan.
  • Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
  • To ensure measurement methodology alignment between PgP2 and supplier.
  • To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.
  • Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

  • Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
  • Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
  • Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
  • Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
  • Support cost saving, 2nd / alternatives source activities and approve alteration change.
  • Regular review with production personnel for CP and FMEA.
  • Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
  • Ensure ANDI contents is checked before release and implemented correctly.
  • Conduct periodic audits to ensure line and process compliances.
  • Conduct Failure Investigation with cross-functional team for non conformance incidents.
  • Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
  • Responsible for plant to plant quality complaint management.
  • Responsible for product transfer on quality measures between plant.
  • Responsible for monthly Quality meeting, warranty analysis reporting.
  • Bachelor Degree or equivalent in Mechanical / Electrical & Electronics Engineering or Science.
  • Proficiency in spoken and written English and Bahasa Malaysia. 
  • Minimum of 2 years experience in a manufacturing environment (Engineering, quality or project management).
  • Good in technical report writing and include complete data analysis and action recommendation.
  • Experience in Plastic molding, metal stamping, turn part, PCBA, die-cast, hardening part is required.
  • Knowledge in software coding will added the advantages Knowledge of ISO 9001 Standard, TS16949, EN Product Standards, Product safety requirement e.g. UL, CSA.
  • Familiar with Statistical QC tools & measurement methods, FMEA, MSA, SPC, etc.
  • Able to understand and interpret technical drawing and perform measurement with measuring equipment such as CMM, vision scope, profile projector, gear profile and hardness tester.
  • Hand on experience on failure analysis and problem solving methodology e.g. 5 Why’s, RCA, fault tree analysis etc.
  • Ability to apply in-depth knowledge of problem solving technique in solving Quality issues including risk assessment evaluation.
  • Effective communication skills with all levels within the organization, suppliers and customers.
  • Proficient in application of DOE, SPC, MSA, Process Capability and 8D.
  • Ability to manage personnel time to ensure completion of assignments.
  • Ability to work with minimum supervision and self-motivation.
  • Only Malaysian citizens are eligible to apply for this position.
Pay
Not stated
Where
Bayan Lepas, my
Work
Not stated
Type
Full time
Posted
20 Nov, 2026
Visa
Sponsorship unknown
Apply on the original postingSign in to apply

Verified board

Seen open on the employer's own job board in the last 3 days.

Open since at least 20 Nov, 2026.

Visa sponsorship

Unknown: ask at the first call

Why, and where it comes fromHide the evidence

Foly found no public US visa filings for this employer. That isn't a no: the posting doesn't say either way.

  • Source: US Department of Labor, LCA disclosure data
  • No records imported yet.

At the first recruiter call, ask: “Does this role support visa sponsorship, now or in the future?” before more rounds.

Public data, not legal advice. For your own situation, ask your school's international office or an immigration attorney.

more at Bosch Group.

20 Nov, 2026

Bosch Group

Internship in Production and Process Engineering

BGBosch Group logo
  • Internship
  • Intern
  • Engineering
Seen open on its job board in the last 3 days

Tranås, se

Internship

Details
20 Nov, 2026

Bosch Group

Internship in Project and Production Engineering

BGBosch Group logo
  • Internship
  • Intern
  • Engineering
Seen open on its job board in the last 3 days

Tranås, se

Internship

Details
20 Nov, 2026

Bosch Group

Manufacturing Engineer Prozess Diffusion (w/m/div.)

BGBosch Group logo
  • Full time
  • Engineering
Seen open on its job board in the last 3 days

Dresden, de

Full time

Details